Chemical Industry and Engineering Progree

• 材料科学与技术 • Previous Articles     Next Articles

Porous-PTFE reinforced composite membrane for fuel cell applications

LI Lei,JIANG Jinzhi,SHANG Yuming,FENG Shaoguang,XIE Xiaofeng   

  1. College of Chemistry and Chemical Engineering,Central South University;
    Institute of Nuclear and New Energy Technology,Tsinghua University
  • Online:2009-08-05 Published:2009-08-05

基于微孔聚四氟乙烯的复合质子交换膜

李 雷,蒋金芝,尚玉明,冯少广,谢晓峰   

  1. 中南大学化学化工学院;清华大学核能与新能源技术研究院

Abstract: ABPSH40/ PTFE composite membranes were prepared by casting ABPSH40 resin solution onto the surface of modified porous PTFE films. Microstructure of the composite membranes was studied by SEM, the methanol permeability was analyzed by GC, and the proton conductivity was investigated by AC impedance. Results showed that the ABPSH40 resin is well plugged into the micropores of PTFE. Compared with ABPSH40 membranes, the dimensional stability and mechanical strength of the composite membranes are both apparently improved. The ABPSH40/ PTFE composite membranes have lower methanol permeability and a comparable proton conductivity with Nafion membrane. It is prospectively that the ABPSH40/ PTFE composite membranes can be used in DMFC.

摘要: 研究了基于微孔聚四氟乙烯(PTFE)的复合方式,通过将自制ABPSH40树脂——N,N-二甲基乙酰胺溶液流延在用液相介质表面处理法改性过的聚四氟乙烯微孔膜表面上,制得了均匀的ABPSH40/PTFE 增强复合质子交换膜。采用扫描电镜(SEM)观察复合膜的表面及断面形态,采用气相色谱仪(GC)测定了复合膜的甲醇渗透性,利用交流阻抗(AC)测定了膜的质子传导率。结果表明,ABPSH40树脂在复合膜内分布均匀,而且PTFE膜微孔填堵充分;复合膜具有优越的尺寸稳定性,较低的甲醇渗透率和接近Nafion膜的质子传导率,和ABPSH40均质膜进行比较后的优点明显。ABPSH40/PTFE 增强复合质子交换膜可望成为一种直接甲醇燃料电池用质子交换膜。

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd