Chemical Industry and Engineering Progree

• 化工过程与装备 • Previous Articles     Next Articles

Effect of air temperature and desorption on oxygen generation by pressure swing adsorption

ZHANG Hui,LIU Yingshu,ZHAI Hui,LIU Wenhai,CAO Hongcheng   

  1. Institute of Gas Separation EngineeringSchool of Mechanical EngineeringUniversity of Science and Technology Beijing
  • Online:2009-04-05 Published:2009-04-05

气源温度与解吸过程对变压吸附制氧效果的影响

张 辉,刘应书,翟 晖,刘文海,曹红程   

  1. 北京科技大学机械工程学院气体分离工程研究所

Abstract: The temperature of feed air and desorption parameterssuch as the inner diameter and length of the pipe for desorption were measured in oxygen generation by pressure swing adsorption. The result showed that thinner and longer pipe could lead to more easy penetration of oxygen in adsorption bed during the adsorption step. Oxygen with a lower concentration would reach the top of the adsorption bed during adsorption and desorptionresulting in lower oxygen concentration and decreased flow rate. The feed air with a higher temperature would enhance the regeneration of molecular sieveand the oxygen concentration increased by 1.2% per 10 ℃ between 15 ℃ and 65 ℃.

摘要: 研究了气源温度和解吸条件对制氧效果的影响,结果表明:细长解吸管路会导致吸附塔内氧浓度波前沿在吸附周期内极易穿透床层,在产氧期及间歇期都会有低浓度氧流入储氧罐,造成氧浓度和流量下降;较高的气源温度有利于分子筛解吸再生,在1565 ℃内,平均每升高10 ℃,产氧体积分数可以提高1.2%

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd