Chemical Industry and Engineering Progree

• 研究开发 • Previous Articles     Next Articles

Investigation on desulfurizing performance of ZSM-5 membrane loaded with cupric ion

YIN Xiaowei,FENG Hui,JU Shengui   

  1. State Key Laboratory of Materials-Oriented Chemical Engineering,Nanjing University of Technology
  • Online:2008-11-05 Published:2008-11-05

载铜ZSM-5分子筛膜脱除硫醇性能

殷晓伟,冯 辉,居沈贵   

  1. 南京工业大学材料化学工程国家重点实验室

Abstract: Membranes of ZSM-5 zeolite were obtained by one step in situ hydrothermal synthesis. XRD and SEM micrographs were used to characterize these membranes. The membranes were used for the separation of ethanethiol from n-hexane. It was shown from the result that:the desulfurizing effect decreased with increasing permeation rate;and the rejection performance was enhanced after the membranes were loaded with Cu2+. However,high concentration of Cu2+ decreased the permeation rate. It was also found that at a higher operation temperature,the permeation rate increased while the desulfurizing effect decreased.

摘要: 采用一次水热合成法,制得ZSM-5分子筛膜,用XRD和扫描电镜对膜的物理及化学结构进行了分析表征。所制得的膜用于正己烷中硫醇的脱除,研究了不同膜通量、负载离子浓度和料液温度对膜性能的影响。结果表明:渗透通量大,对硫醇的脱除不利;铜离子的引入大大提高了分子筛膜管的截留性能,但负载铜离子过高会降低模拟汽油的通量;操作温度升高,渗透通量增加,膜对硫醇的脱除率下降。

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd