Performance research on high temperature CO2 heat pump with supercritical enhanced gas injection

doi:10.16085/j.issn.1000-6613.2019-1404

Chemical Industry and Engineering Progress ›› 2020, Vol. 39 ›› Issue (5): 1667-1673.DOI: 10.16085/j.issn.1000-6613.2019-1404

• Chemical processes and equipment • Previous Articles Next Articles

Performance research on high temperature CO₂ heat pump with supercritical enhanced gas injection

Mengxia WU¹^,²^,³^,⁴(), Hanzhi WANG²^,³^,⁴, Shuaiqi LI²^,³^,⁴, Wenji SONG²^,³^,⁴, Ziping FENG¹^,²^,³^,⁴()

^1.School of Engineering Science, University of Science and Technology of China, Hefei 230026, Anhui, China
^2.Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, Guangdong, China
^3.CAS Key Laboratory of Renewable Energy, Guangzhou 510640, Guangdong, China
^4.Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou 510640, Guangdong, China

Online:2020-05-25 Published:2020-05-05
Contact: Ziping FENG

高温CO₂热泵的超临界喷气增焓性能

吴孟霞¹^,²^,³^,⁴(), 王汉治²^,³^,⁴, 李帅旗²^,³^,⁴, 宋文吉²^,³^,⁴, 冯自平¹^,²^,³^,⁴()

^1.中国科学技术大学工程科学学院，安徽合肥 230026
^2.中国科学院广州能源研究所，广东广州 510640
^3.中国科学院可再生能源重点实验室，广东广州 510640
^4.广东省新能源与可再生能源研究开发与应用重点实验室，广东广州 510640

通讯作者: 冯自平
作者简介:吴孟霞（1994—），女，硕士研究生，研究方向为热泵技术。E-mail：wumx@ms.giec.ac.cn。
基金资助:
广州市科技计划(201903010029);中国科学院可再生能源重点实验室基金(y807j11001)

Abstract

Abstract:

A novel high temperature CO₂ heat pump cycle with supercritical enhanced gas injection was proposed to significantly improve heating performance under high temperature hydronic heating conditions. The numerical model of the high temperature CO₂ heat pump system with supercritical gas injection was established, and the performance of the system was analyzed by EES (engineering equation solver) software. The influence of parameters such as evaporation temperature, middle pressure of compressor, gas cooler pressure, etc. on system performance at the high gas cooler outlet temperature was mainly studied. The results indicated that COP of 3.0 can be reached when the gas cooler outlet temperature was as high as 60℃. In comparison to common vapor injection system, the COP improved distinctly. As compared to conventional system without gas injection, the COP increased by 14.8%, 21.2%, 29.2% respectively with gas injection ratio of 0.3, 0.4, 0.5 at the gas cooler outlet temperature of 60℃. The influence of middle pressure and gas cooler pressure on COP have the same variation trend while the effect of gas cooler pressure is more significant. Besides, there exist an optimal gas cooler pressure and middle pressure. The optimal gas cooler pressure and middle pressure are 13.5MPa and 8.5MPa, respectively, when the gas cooler outlet temperature is 60℃ and the gas injection ratio is 0.4.

Key words: high temperature CO₂ heat pump, supercritical enhanced gas injection, hydronic heating, gas injection ratio, numerical modeling

摘要：

提出了一种基于高温超临界喷气增焓技术的新型CO₂热泵循环，以显著提升跨临界CO₂热泵在高温循环加热工况下的制热性能。通过建立超临界喷气增焓型高温CO₂热泵系统的数值模型，并采用EES（engineering equation solver）软件对该热泵系统的循环加热性能进行了仿真分析。研究了在较高气体冷却器出口温度下，蒸发温度、压缩机中间压力、气体冷却器压力等参数对单位容积制热量和性能系数（COP）的影响。结果表明：在最优排气压力下，气体冷却器出口温度高达60℃时，该热泵循环的COP也能达到3.0左右；相对于普通喷气增焓系统，COP明显提高；相对于无喷气增焓的常规系统，在气体冷却器出口温度为60℃时，相对补气量为0.3、0.4、0.5的超临界喷气增焓系统COP分别提高了14.8%、21.2%、29.2%；气体冷却器压力和中间压力对系统COP的影响变化趋势一致，但气体冷却器压力的影响更为显著；此外，存在最优的气体冷却器压力和中间压力使系统COP达到最大，在气体冷却器出口温度为60℃，相对补气量为0.4时，最优气体冷却器压力和中间压力分别为13.5MPa和8.5MPa。

关键词: 高温CO₂热泵, 超临界喷气增焓, 循环加热, 相对补气量, 数值模拟

CLC Number:

TH17

Mengxia WU, Hanzhi WANG, Shuaiqi LI, Wenji SONG, Ziping FENG. Performance research on high temperature CO₂ heat pump with supercritical enhanced gas injection[J]. Chemical Industry and Engineering Progress, 2020, 39(5): 1667-1673.

吴孟霞, 王汉治, 李帅旗, 宋文吉, 冯自平. 高温CO₂热泵的超临界喷气增焓性能[J]. 化工进展, 2020, 39(5): 1667-1673.

References

1	NEKSA P. CO₂ heat pump systems[J]. International Journal of Refrigeration, 2002, 25(4): 421-427.
2	PEARSON A. Carbon dioxide—new uses for an old refrigerant[J]. International Journal of Refrigeration, 2005, 28: 1140-1148.
3	LORENTZEN G. Revival of carbon dioxide as a refrigerant[J]. International Journal of Refrigeration, 1994, 17 (5): 292-301.
4	AUSTIN B T, SUMATHY K. Transcritical carbon dioxide heat pump systems: a review[J]. Renewable and Sustainable Energy Reviews, 2011, 15(8): 4013-4029.
5	李慧, 曹祥, 张春路. 二氧化碳热泵技术的发展及应用案例分析[J]. 化工进展, 2016, 35(s2): 421-426.
5	LI Hui, CAO Xiang, ZHANG Chunlu. Developments and application analysis of carbon dioxide heat pump[J]. Chemical Industry and Engineering Progress, 2016,35(s2): 421-426.
6	heat pump programme IEA. Applications of industrial heat pumps. Final report part 1[R]. 2014.
7	KANG D H, NA S I, KIM M S. Recent researches on steam generation heat pump system[J]. International Journal of Air-Conditioning and Refrigeration, 2017, 25(4): 1-8.
8	WHITE S D, YARRALL M G, CLELAND D J, et al. Modelling the performance of a transcritical CO₂ heat pump for high temperature heating[J]. International Journal of Refrigeration, 2002, 25: 479-486.
9	祝银海, 李聪慧, 姜培学. 跨临界CO₂热泵高温热水器性能实验研究[J]. 工程热物理学报, 2018, 39(10): 2113-2117.
9	ZHU Yinhai, LI Conghui, JIANG Peixue. Experimental investigation trans-critical CO₂ heat pump high temperature water heater[J]. Journal of Engineering Thermophysics, 2018, 39(10): 2113-2117.
10	KAISER W H, ELDIK M VAN. The potential for CO₂ heat pumps in the South African industrial sector [C]//2015 International Conference on the Industrial and Commercial Use of Energy, Cape Town, South Africa, 2015.
11	王沣浩, 王志华, 郑煜鑫, 等. 低温环境下空气源热泵的研究现状及展望[J]. 制冷学报, 2013, 34(5): 47-54.
11	WANG Fenghao, WANG Zhihua, ZHENG Yuxin, et al. Research progress and prospect of air source heat pump in low temperature environment[J]. Journal of Refrigeration, 2013, 34(5): 47-54.
12	SARKAR J, BHATTACHARYYA S, GOPAL MR. Natural refrigerant-based subcritical and transcritical cycles for high temperature heating[J]. International Journal of Refrigeration, 2007, 30(1): 3-10.
13	TSAMOS K M, GE Y T, SANTOSA I D M C, et al. Experimental investigation of gas cooler/condenser designs and effects on a CO₂ booster system[J]. Applied Energy, 2017, 186: 470-479.
14	STENE J. Residential CO₂ heat pump system for combined space heating and hot water heating[J]. International Journal of Refrigeration, 2005, 28(8): 1259–1265.
15	BAEK C, HEO J, JUNG J, et al. Effects of vapor injection techniques on the heating performance of a CO₂ heat pump at low ambient temperatures[J]. International Journal of Refrigeration, 2014, 43: 26-35.
16	CHUNG H J, BAEK C, KANG H, et al. Performance evaluation of a gas injection CO₂ heat pump according to operating parameters in extreme heating and cooling conditions[J]. Energy, 2018, 154: 337-345.
17	CHO H, BAEK C, PARK C, et al. Performance evaluation of a two-stage CO₂ cycle with gas injection in the cooling mode operation[J]. International Journal of Refrigeration, 2009, 32(1): 40-46.
18	BAI T, YAN G, YU J. Thermodynamic analyses on an ejector enhanced CO₂ transcritical heat pump cycle with vapor injection[J]. International Journal of Refrigeration, 2015, 58: 22-34.
19	SARKAR J, BHATTACHARYYA S, GOPAL MR. Simulation of a transcritical CO₂ heat pump cycle for simultaneous cooling and heating applications[J]. International Journal of Refrigeration, 2006, 29(5): 735-743.
20	PITARCH M, NAVARRO-PERIS E, et al. Analysis and optimization of different two-stage transcritical carbon dioxide cycles for heating applications[J]. International Journal of Refrigeration, 2016, 70: 235-242.
21	YARI M. Performance analysis and optimization of a new two-stage ejector-expansion transcritical CO₂refrigeration cycle[J]. International Journal of Thermal Science, 2009, 48(10): 1997-2005.

[1]	Taihao SONG, Guosheng XU. Application of online monitoring and spectrum analysis in fault diagnosis of turbine [J]. Chemical Industry and Engineering Progress, 2020, 39(S1): 101-106.
[2]	Jiju GUAN,Jinsong CHEN,Tao LÜ,Xuefeng XU. Stability and heat transfer enhancement of machining use nanofluids prepared by carbon nanotube composite [J]. Chemical Industry and Engineering Progress, 2019, 38(10): 4674-4683.
[3]	SUN Weifeng, ZHANG Xingfang, XUAN Zhengnan, LIU Yan, LI Zhihai. Development of RCM in aviation,weaponry and its useful experience for application in petrochemical industry [J]. Chemical Industry and Engineering Progree, 2015, 34(1): 32-36.

Performance research on high temperature CO₂ heat pump with supercritical enhanced gas injection

高温CO₂热泵的超临界喷气增焓性能

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics

Comments