Chemical Industry and Engineering Progress ›› 2018, Vol. 37 ›› Issue (04): 1276-1286.DOI: 10.16085/j.issn.1000-6613.2017-2483
Previous Articles Next Articles
LIN Wenzhu, CAO Jiahao, FANG Xiaoming, ZHANG Zhengguo
Received:
2017-12-01
Revised:
2017-12-27
Online:
2018-04-05
Published:
2018-04-05
林文珠, 曹嘉豪, 方晓明, 张正国
通讯作者:
张正国,教授,博士生导师,研究方向为传热强化。
作者简介:
林文珠(1993-),女,博士研究生,研究方向为传热强化。E-mail:1049850449@qq.com。
基金资助:
CLC Number:
LIN Wenzhu, CAO Jiahao, FANG Xiaoming, ZHANG Zhengguo. Research progress of heat transfer enhancement of shell-and-tube heat exchanger[J]. Chemical Industry and Engineering Progress, 2018, 37(04): 1276-1286.
林文珠, 曹嘉豪, 方晓明, 张正国. 管壳式换热器强化传热研究进展[J]. 化工进展, 2018, 37(04): 1276-1286.
Add to citation manager EndNote|Ris|BibTeX
URL: https://hgjz.cip.com.cn/EN/10.16085/j.issn.1000-6613.2017-2483
[1] 齐洪洋,高磊,张莹莹,等. 管壳式换热器强化传热技术概述[J]. 压力容器,2012,29(7):73-78. QI H Y,GAO L,ZHANG Y Y,et al. The overview of heat transfer enhancement of shell and tube heat exchangers[J]. Pressure Vessel Technology,2012,29(7):73-78. [2] SALAHUDDIN U,BILAL M,EJAZ H. A review of the advancements made in helical baffles used in shell and tube heat exchangers[J]. International Communications in Heat and Mass Transfer,2015,67:104-108. [3] SHEIKHOLESLAMI M,GORJI-BANDPY M,GANJI D D. Review of heat transfer enhancement methods:focus on passive methods using swirl flow devices[J]. Renewable & Sustainable Energy Reviews,2015,49:444-469. [4] LIU S,SAKR M. A comprehensive review on passive heat transfer enhancements in pipe exchangers[J] Renewable and Sustainable Energy Reviews,2013,19:64-81. [5] 杨程,李奇军,时立民,等. 管壳式换热器强化传热技术研究综述[J]. 天水师范学院学报,2015,35(2):60-65. YANG C,LI Q J,SHI L M,et al. Research progress of heat transfer enhancement of shell-and-tube heat exchanger[J]. Journal of Tianshui Normal University,2015,35(2):60-65. [6] 方玉堂,万伟军. 潜热型功能热流体的研究进展[J]. 材料导报,2009,23(15):108-111. FANG Y T,WANG W J. Research progress of latent heat fluid[J] Materials Review,2009,23(15):108-111. [7] 李志安,任克华,宿痴. 波纹管换热器设计标准介绍及相关问题的探讨[J]. 压力容器,2007,24(4):61-64. LI Z A,REN K H,SU C. Introduction of design standard of bellows heat exchanger and discussion of related problems[J]. Pressure Vessel Technology,2007,24(4):61-64. [8] 李洪亮,关延军,刘嘉渝,等. 新型外螺纹横纹管管外强化传热分析[J]. 化工科技,2016,24(6):50-55. LI H L,GUANG Y J,LIU J Y,et al. Heat transfer analysis of a new type of external thread tubular tube[J]. Science & Technology in Chemical Industry,2016,24(6):50-55. [9] 杨胜,张颂,张莉,等. 螺旋扁管强化传热技术研究进展[J]. 冶金能源,2010,29(3):17-22. YANG S,ZHANG S,ZHANG L,et al. Research progress of spiral flat tube reinforced heat transfer technology[J]. Energy for Metallurgical Industry,2010,29(3):17-22. [10] 焦凤,邓先和. 矩形自支撑缩放管换热器强化传热的结构优化[J]. 化工学报,2013,64(7):2376-2385. JIAO F,DENG X H. Structure optimization of reinforced heat transfer in rectangular self supporting shrink tubing heat exchanger[J]. CIESC Journal,2013,64(7):2376-2385. [11] KUMAR A,PRASAD B N. Investigation of twisted tape inserted solar water heaters-heat transfer,friction factor and thermal performance results[J]. Renewable Energy,2000,19(3):379-398. [12] EIAMSA-ARD S,SOMKLEANG P,NUNTADUSIT C,et al. Heat transfer enhancement in tube by inserting uniform/non-uniform twisted-tapes with alternate axes:effect of rotated-axis length[J] Applied Thermal Engineering,2013,54(1):289-309. [13] KAPSE A A,DONGARWAR P R,GAWANDE R R,et al. Heat transfer and pressure drop characteristics in a circular tube fitted with combined twisted tape and helical screw tape insert[J]. International Journal of Computer Applications,2015,3:22-25. [14] THIANPONG C,EIAMSA-ARD P,EIAMSA-ARD S. Heat transfer and thermal performance characteristics of heat exchanger tube fitted with perforated twisted-tapes[J]. Heat & Mass Transfer,2012,48(6):881-892. [15] EIAMSA-ARD S,PROMVONGE P. Enhancement of heat transfer in a tube with regularly-spaced helical tape swirl generators[J]. Solar Energy,2005,78(4):483-494. [16] GUNES S,OZCEYHAN V,BUYUKALACA O. Heat transfer enhancement in a tube with equilateral triangle cross sectioned coiled wire inserts[J]. Experimental Thermal & Fluid Science,2010,34(6):684-691. [17] PROMVONGE P. Thermal augmentation in circular tube with twisted tape and wire coil turbulators[J]. Energy Conversion & Management,2008,49(11):2949-2955. [18] EIAMSA-ARD S,YONGSIRI K,NANAN K,et al. Heat transfer augmentation by helically twisted tapes as swirl and turbulence promoters[J]. Chemical Engineering & Processing Process Intensification,2012,60(60):42-48. [19] NAPHON P. Heat transfer and pressure drop in the horizontal double pipes with and without twisted tape insert[J]. International Communications in Heat & Mass Transfer,2006,33(2):166-175. [20] SARADA S N,RAJU A S R,RADHA K K,et al. Enhancement of heat transfer using varying width twisted tape inserts[J]. International Journal of Engineering,Sciece and Technology,2010,2(6):107-118. [21] 韩继广,吴新,周翼,等. 管内插入扭带及螺旋线圈的传热与阻力特性实验研究[J]. 热能动力工程,2012,27(4):434-438. HAN J G,WU X,ZHOU Y,et al. Experimental study on heat transfer and resistance characteristics of tube and helical coil inserted into tube[J]. Journal of Engineering for Thermal Energy and Power,2012,27(4):434-438. [22] AKHAVAN-BEHABADI M A,KUMAR R,SALIMPOUR M R,et al. Pressure drop and heat transfer augmentation due to coiled wire inserts during laminar flow of oil inside a horizontal tube[J]. International Journal of Thermal Sciences,2010,49(2):373-9. [23] MARTINEZ D S,GARC A A,SOLANO J P,et al. Heat transfer enhancement of laminar and transitional Newtonian and non-Newtonian flows in tubes with wire coil inserts[J]. International Journal of Heat and Mass Transfer,2014,76:540-8. [24] GUNES S,MANAY E,SENYIGIT E,et al. A Taguchi approach for optimization of design parameters in a tube with coiled wire inserts[J]. Applied Thermal Engineering,2011,31(14/15):2568-2577. [25] PONGSOI P,PIKULKAJORN S,WONGWISES S. Heat transfer and flow characteristics of spiral fin-and-tube heat exchangers:a review[J]. International Journal of Heat and Mass Transfer,2014,79:417-431. [26] LIU X,YU J,YAN G. A numerical study on the air-side heat transfer of perforated finned-tube heat exchangers with large fin pitches[J]. International Journal of Heat and Mass Transfer,2016,100:199-207. [27] SYED K S,ISHAQ M,IQBAL Z,et al. Numerical study of an innovative design of a finned double-pipe heat exchanger with variable fin-tip thickness[J]. Energy Conversion and Management,2015,98:69-80. [28] IQBAL Z,SYED K S,ISHAQ M. Optimal fin shape in finned double pipe with fully developed laminar flow[J]. Applied Thermal Engineering,2013,51(1/2):1202-1223. [29] 秦朋,凌子夜,徐涛,等. R407C在花瓣型翅片管与低肋管外的冷凝传热性能对比[J]. 工程热物理学报,2013(12):2347-2350. QIN P,LING Z Y,XU T,et al. The comparsion between R407C in the petal-shaped fin tube and low-cost tube condensation heat transfer performance[J]. Journal of Engineering Thermophysics,2013(12):2347-2350. [30] EL MAAKOUL A,LAKNIZI A,SAADEDDINE S,et al. Numerical comparison of shell-side performance for shell and tube heat exchangers with trefoil-hole,helical and segmental baffles[J]. Applied Thermal Engineering,2016,109:175-185. [31] WANG Q,CHEN G,CHEN Q,et al. Review of improvements on shell-and-tube heat exchangers with helical baffles[J]. Heat Transfer Engineering,2010,31(10):836-853. [32] LUTCHA J,NEMCANSKY J. Performance improvement of tubular heat exchangers by helical baffles[J]. Chemical Engineering Research & Design,1990,68(3):263-270. [33] ZHANG J F,GUO S L,LI Z Z,et al. Experimental performance comparison of shell-and-tube oil coolers with overlapped helical baffles and segmental baffles[J]. Applied Thermal Engineering,2013,58(1/2):336-343. [34] PENG B,WANG Q W,ZHANG C,et al. An experimental study of shell-and-tube heat exchangers with continuous helical baffles[J]. Journal of Heat Transfer,2007,129(10):1425. [35] LEI Y G,HE Y L,CHU P,et al. Design and optimization of heat exchangers with helical baffles[J]. Chemical Engineering Science,2008,63(17):4386-4395. [36] ZHANG J F,HE Y L,TAO W Q. 3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles-Part I:Numerical model and results of whole heat exchanger with middle-overlapped helical baffles[J]. International Journal of Heat and Mass Transfer,2009,52(23):5371-5380. [37] ZHANG J F,HE Y L,TAO W Q. 3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles-Part Ⅱ:Simulation results of periodic model and comparison between continuous and noncontinuous helical baffles[J]. International Journal of Heat & Mass Transfer,2009,52(23/24):5381-5389. [38] CHEN Y P,SHENG Y J,DONG C,et al. Numerical simulation on flow field in circumferential overlap trisection helical baffle heat exchanger[J]. Applied Thermal Engineering,2013,50(1):1035-1043. [39] DONG C,CHEN Y P,WU J F. Flow and heat transfer performances of helical baffle heat exchangers with different baffle configurations[J]. Applied Thermal Engineering,2015,80:328-338. [40] DONG C,CHEN Y P,WU J F. Performances of helical baffle heat exchangers with different baffle assembly configurations[J]. Canadian Journal of Chemical Engineering,2015,93(8):1500-1508. [41] DONG C,CHEN Y P,WU J F. Performance comparison of trisection helical baffle heat exchangers with different circumferential overlap sizes[J]. Chemical Engineering & Technology,2015,38(7):1277-1284. [42] TAHER F N,MOVASSAG S Z,RAZMI K,et al. Baffle space impact on the performance of helical baffle shell and tube heat exchangers[J]. Applied Thermal Engineering,2012,44:143-149. [43] HUSSEIN A M,SHARMA K V,BAKAR R A,et al. A review of forced convection heat transfer enhancement and hydrodynamic characteristics of a nanofluid[J]. Renewable and Sustainable Energy Reviews,2014,29:734-743. [44] GODSON L,RAJA B,LAL D M,et al. Enhancement of heat transfer using nanofluids-An overview[J]. Renewable & Sustainable Energy Reviews,2010,14(2):629-641. [45] PAUL G,CHOPKAR M,MANNA I,et al. Techniques for measuring the thermal conductivity of nanofluids:a review[J]. Renewable & Sustainable Energy Reviews,2010,14(7):1913-1924. [46] HUSSEIN A M,SHARMA K V,BAKAR R A,et al. A review of forced convection heat transfer enhancement and hydrodynamic characteristics of a nanofluid[J]. Renewable & Sustainable Energy Reviews,2014,29(7):734-743. [47] XUAN Y,QIANG L. Heat transfer enhancement of nanofluids[J]. International Journal of Heat & Fluid Flow,2000,21(1):58-64. [48] SOLANGI K H,KAZI S N,LUHUR M R,et al. A comprehensive review of thermo-physical properties and convective heat transfer to nanofluids[J]. Energy,2015,89:1065-1086. [49] SAJADI A R,KAZEMI M H. Investigation of turbulent convective heat transfer and pressure drop of TiO2/water nanofluid in circular tube[J]. International Communications in Heat and Mass Transfer,2011,38(10):1474-1478. [50] SURESH S,VENKITARAJ K P,SELVAKUMAR P,et al. Effect of Al2O3-Cu/water hybrid nanofluid in heat transfer[J]. Experimental Thermal and Fluid Science,2012,38:54-60. [51] SARAFRAZ M M,HORMOZI F. Heat transfer,pressure drop and fouling studies of multi-walled carbon nanotube nano-fluids inside a plate heat exchanger[J]. Experimental Thermal and Fluid Science,2016,72:1-11. [52] HUANG D,WU Z,SUNDEN B. Effects of hybrid nanofluid mixture in plate heat exchangers[J]. Experimental Thermal and Fluid Science,2016,72:190-196. [53] FARAJOLLAHI B,ETEMAD S G,HOJJAT M. Heat transfer of nanofluids in a shell and tube heat exchanger[J]. International Journal of Heat and Mass Transfer,2010,53(1/2/3):12-17. [54] LOTFI R,RASHIDI A M,AMROLLAHI A. Experimental study on the heat transfer enhancement of MWNT-water nanofluid in a shell and tube heat exchanger[J]. International Communications in Heat and Mass Transfer,2012,39(1):108-111. [55] DELGADO M,L ZARO A,MAZO J,et al. Experimental analysis of a low cost phase change material emulsion for its use as thermal storage system[J]. Energy Conversion and Management,2015,106:201-212. [56] WANG F,LIU J,FANG X,et al. Graphite nanoparticles-dispersed paraffin/water emulsion with enhanced thermal-physical property and photo-thermal performance[J]. Solar Energy Materials and Solar Cells,2016,147:101-107. [57] SARI A,ALKAN C,KARAIPEKLI A,et al. Microencapsulated n-octacosane as phase change material for thermal energy storage[J]. Solar Energy,2009,83(10):1757-1763. [58] ZHANG H,WANG X,WU D. Silica encapsulation of N-octadecane via sol-gel process:a novel microencapsulated phase-change material with enhanced thermal conductivity and performance[J]. Journal of Colloid and Interface Science,2010,343(1):246-255. [59] 吴玉庭,任楠,马重芳. 熔融盐显热蓄热技术的研究与应用进展[J]. 储能科学与技术,2013,2(6):586-592. WU Y T,REN N,MA C F. Research and application progress of molten salt sensible heat accumulation technology[J]. Energy Storage Science and Technology,2013,2(6):586-592. [60] XIAO P,GUO L,ZHANG X. Investigations on heat transfer characteristic of molten salt flow in helical annular duct[J]. Applied Thermal Engineering,2015,88:22-32. [61] PENG Q,DING J,WEI X,et al. The preparation and properties of multi-component molten salts[J]. Applied Energy,2010,87(9):2812-2817. [62] LIU J,WANG F,ZHANG L,et al. Thermodynamic properties and thermal stability of ionic liquid-based nanofluids containing graphene as advanced heat transfer fluids for medium-to-high-temperature applications[J]. Renewable Energy,2014,63:519-523. [63] LIU J,YE Z,ZHANG L,et al. A combined numerical and experimental study on graphene/ionic liquid nanofluid based direct absorption solar collector[J]. Sol. Energy. Mater. Sol. Cells,2015,136:177-186. [64] LIU J,XU C,CHEN L,et al. Preparation and photo-thermal conversion performance of modified graphene/ionic liquid nanofluids with excellent dispersion stability[J]. Sol Energy Mater Sol Cells,2017,170:219-232. [65] LIU J,CHEN L,FANG X,et al. Preparation of graphite nanoparticles-modified phase change microcapsules and their dispersed slurry for direct absorption solar collectors[J]. Sol. Energy Mater. Sol. Cells,2017,159:159-166. [66] PONWEISER K,LINZER W,MALINOVEC M. Performance comparison between wire coil and twisted tape inserts[J]. Journal of Enhanced Heat Transfer,2004,11(4):359-370. [67] EIAMSA-ARD S,NIVESRANGSAN P,CHOKPHOEMPHUN S,et al. Influence of combined non-uniform wire coil and twisted tape inserts on thermal performance characteristics[J]. International Communications in Heat & Mass Transfer,2010,37(7):850-856. [68] SAHA S K,BARMAN B K,BANERJEE S. Heat transfer enhancement of laminar flow through a circular tube having wire coil inserts and fitted with center-cleared twisted tape[J]. Journal of Thermal Science & Engineering Applications,2012,4(3):031003. [69] MATANI A G,DAHAKE S A,PUBLICATION I. Experimental study of heat transfer enhancement in a pipe using twisted tapes and wire coils[J]. International Journal of Mechanical Engineering and Technology,2013,4(2):100-111. [70] DARZI A A R,FARHADI M,SEDIGHI K,et al. Turbulent heat transfer of Al2O3-water nanofluid inside helically corrugated tubes:numerical study[J]. International Communications in Heat and Mass Transfer,2013,41:68-75. [71] CHANDRASEKAR M,SURESH S,CHANDRA B A. Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid in a circular pipe under laminar flow with wire coil inserts[J]. Experimental Thermal and Fluid Science,2010,34(2):122-130. [72] BAHIRAEI M,HANGI M,SAEEDAN M. A novel application for energy efficiency improvement using nanofluid in shell and tube heat exchanger equipped with helical baffles[J]. Energy,2015,93:2229-2240. [73] 谭允开,何振斌,张正国. 非牛顿纳米流体在螺旋隔板翅片管换热器与弓形隔板光滑管换热器壳程的换热性能对比[J]. 工程热物理学报,2016(4):818-824. TAN Y K,HE Z B,ZHANG Z G. Comparison of heat transfer performance of non-Newtonian nanofluids in helical baffle fin-tube heat exchangers and segmental baffle heat exchanger[J]. Journal of Engineering Thermophysics,2016(4):818-824. [74] HE Z,FANG X,ZHANG Z,et al. Numerical investigation on performance comparison of non-Newtonian fluid flow in Vertical heat exchangers combined helical baffle with elliptic and circular tubes[J]. Applied Thermal Engineering,2016,100:84-97. [75] TIAN J,HE Z,XU T,et al. Rheological property and thermal conductivity of multi-walled carbon nano-tubes-dispersed non-Newtonian nano-fluids based on an aqueous solution of carboxymethyl cellulose[J]. Experimental Heat Transfer,2015,29(3):378-391. |
[1] | ZHANG Dailing, DING Yumei, ZUO Xiahua, LI Haowei, YANG Weimin, YAN Hua, AN Ying. Photothermal characteristics of waste toner nanofluids [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4791-4798. |
[2] | LU Shijian, LIU Ling, LIU Ziwu, GUO Bowen, YU Xulin, LIANG Yan, ZHAO Dongya, ZHU Quanmin. Study of CO2 absorption stability of AEP-DPA-CuO phase change nanofluids [J]. Chemical Industry and Engineering Progress, 2022, 41(8): 4555-4561. |
[3] | LIU Shijie, MO Xun, TU Aimin, ZHU Dongsheng, TAN Lianyuan. Shell-side heat transfer enhancement of a novel longitudinal flow oil cooler [J]. Chemical Industry and Engineering Progress, 2022, 41(7): 3475-3482. |
[4] | LI Yifan, WANG Zhipeng. Flow and heat transfer characteristics in microchannels with periodic fluid disturbance structures [J]. Chemical Industry and Engineering Progress, 2022, 41(6): 2893-2901. |
[5] | LI Yongtong, LIU Jian, YANG Laishun. Thermo-hydraulic performance analysis of novel metal foam and pin fin hybrid heat sink [J]. Chemical Industry and Engineering Progress, 2022, 41(5): 2268-2276. |
[6] | YANG Honghai, ZHANG Miao, LIU Liwei, ZHOU Yi, SHEN Junjie, SHI Weigang, YIN Yong. Heat transfer performance enhancement and prediction in GO/water pulsating heat pipe [J]. Chemical Industry and Engineering Progress, 2022, 41(4): 1725-1734. |
[7] | LIN Qingyu, WANG Zhu, FENG Zhenfei, LING Biao, CHEN Zhen. Review progress on twisted tape structure for heat transfer and entropy generation in tube [J]. Chemical Industry and Engineering Progress, 2022, 41(11): 5709-5721. |
[8] | LIN Weixiang, SU Gangchuan, CHEN Qiang, WEN Jian, AKRAPHON Janon, WANG Simin. Influencing factors of ultrasound enhanced heat transfer of immersed coil heat exchanger [J]. Chemical Industry and Engineering Progress, 2022, 41(1): 40-51. |
[9] | LIN Wenzhu, LING Ziye, FANG Xiaoming, ZHANG Zhengguo. Research progress on heat transfer of phase change material heat storage technology [J]. Chemical Industry and Engineering Progress, 2021, 40(9): 5166-5179. |
[10] | MA Mingyan, ZHAI Yuling, XUAN Zihao, ZHOU Shuguang, LI Zhixiang. Stability and thermal performance of ternary hybrid nanofluids [J]. Chemical Industry and Engineering Progress, 2021, 40(8): 4179-4186. |
[11] | MEGN Xue, JING Hengzhu, CAO Zhenzhen, LI Hongming. Design of shell and tube heat exchanger based on Aspen EDR [J]. Chemical Industry and Engineering Progress, 2019, 38(s1): 275-277. |
[12] | Xuzhong ZANG,Er SHI,Junping FU,Tao YU. A review of magnetic field effects on flow and heat transfer in magnetic nanofluids [J]. Chemical Industry and Engineering Progress, 2019, 38(12): 5410-5419. |
[13] | Yuling ZHAI,Jiang WANG,Long LI,Mingyan MA,Peitao YAO. Evaluation and effect of mixture ratio on heat transfer performance of Al2O3/water nanofluids [J]. Chemical Industry and Engineering Progress, 2019, 38(11): 4865-4872. |
[14] | Yuan LI,Qinfeng DI,Shuai HUA,Jingnan ZHANG,Feng YE,Wenchang WANG. Research progress of reservoirs wettability alteration by using nanofluids for enhancing oil recovery [J]. Chemical Industry and Engineering Progress, 2019, 38(08): 3612-3620. |
[15] | Xin GU, Zhiyang ZHENG, Yuankun LUO, Xiaochao XIONG, Dabo ZHANG. Optimization on shell side structure of twisty flow heat exchanger based on orthogonal experiment [J]. Chemical Industry and Engineering Progress, 2019, 38(04): 1688-1695. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||
京ICP备12046843号-2;京公网安备 11010102001994号 Copyright © Chemical Industry and Engineering Progress, All Rights Reserved. E-mail: hgjz@cip.com.cn Powered by Beijing Magtech Co. Ltd |