[1] SRIDHAR R,TOGURI J M,SIMEONOV S. Copper losses and thermodynamic considerations in copper smelting[J]. Metallurgical and Materials Transactions B,1997,28(2):191-200.
[2] SERGEI A D,ARTHUR D P. A thermodynamic database for copper smelting and converting[J]. Metallurgical and Materials Transactions B,1999,30(4):661-669.
[3] 肖清泰,王华,王仕博,等. 基于改进0-1测试的多相宏观混合效果混沌表征[J]. 化学工程,2016,44(2):46-51. XIAO Q T,WANG H,WANG S B,et al. Chao characterization of multiphase macromixing efficiency based on modified 0-1 test[J]. Chemical Engineering,2016,44(2):46-51.
[4] 闫红杰,刘方侃,张振扬,等. 氧枪布置方式对底吹熔池熔炼过程的影响[J]. 中国有色金属学报,2012,22(8):2393-2400. YAN H J,LIU F K,ZHANG Z Y,et al. Influence of lance arrangement on bottom-blowing bath smelting process[J]. The Chinese Journal of Nonferrous Metals,2012,22(8):2393-2400.
[5] 张振扬,陈卓,闫红杰,等. 富氧底吹熔炼炉内气液两相流动的数值模拟[J]. 中国有色金属学报,2012,22(6):1826-1834. ZHANG Z Y,CHEN Z,YAN H J,et al. Numerical simulation of gas-liquid multi-phase flows in oxygen enriched bottom-blowing furnace[J]. The Chinese Journal of Nonferrous Metals,2012,22(6):1826-1834.
[6] 邵品,张廷安,刘燕,等. 底吹冰铜吹炼炉中气-液流动状况的数学模拟[J]. 东北大学学报(自然科学版),2012,33(9):1303-1306,1318. SHAO P,ZHANG T A,LIU Y,et al. Numerical simulation of gas-liquid flow behavior in a copper matte bottom-blowing converter[J]. Journal of Northeastern University(Natural Science),2012,33(9):1303-1306,1318.
[7] 王东兴,张廷安,刘燕,等. 氧气底吹造锍过程中气泡行为的水模型实验[J]. 东北大学学报(自然科学版),2013,34(12):1755-1758. WANG D X,ZHANG T A,LIU Y,et al. Water model study of bubble behavior in matte smelting process with oxygen bottom blowing[J]. Journal of Northeastern University(Natural Science),2013,34(12):1755-1758.
[8] 余跃,温治,刘训良,等. 喷枪结构对底吹炼铜炉流场影响的模拟及实验研究[J]. 中南大学学报(自然科学版),2014,45(12):4129-4137. YU Y,WEN Z,LIU X L,et al. Simulation and experimental of influence of nozzle structure on bottom-blowing furnace flowing process[J]. Journal of Central South University(Science and Technology),2014,45(12):4129-4137.
[9] 郭学益,王亲猛,廖立乐,等. 铜富氧底吹熔池熔炼过程机理及多相界面行为[J]. 有色金属科学与工程,2014,5(5):28-34. GUO X Y,WANG Q M,LIAO L L,et al. Mechanism and multiphase interface behavior of copper sulfide smelting in oxygen-enriched bottom blowing furnace[J]. Nonferrous Metals Science and Engineering,2014,5(5):28-34.
[10] 郭学益,王亲猛,田庆华,等. 基于区位氧势硫势梯度变化下铜富氧底吹熔池熔炼非稳态多相平衡过程[J]. 中国有色金属学报,2015,25(4):1072-1079. GUO X Y,WANG Q M,TIAN Q H,et al. Non-steady multiphase equilibrium process of copper oxygen-enriched bottom blowing bath smelting with gradual change of oxygen and sulfur potential of different positions in furnace[J]. The Chinese Journal of Nonferrous Metals,2015,25(4):1072-1079.
[11] 郭学益,王亲猛,田庆华,等. 氧气底吹熔炼工艺分析及过程优化[J]. 中国有色金属学报,2016,26(3):689-698. GUO X Y,WANG Q M,TIAN Q H,et al. Analysis and optimization of oxygen bottom blowing copper smelting process[J]. The Chinese Journal of Nonferrous Metals,2016,26(3):689-698.
[12] LI Y,ZHANG J P,FAN L S. Discrete-phase simulation of single bubble rise behavior at elevated pressures in a bubble column[J]. Chemistry Engineering Science,2000,55(20):4597-4609.
[13] YANG G,DU B,FAN L. Bubble formation and dynamics in gas-liquid-solid fluidization-a review[J]. Chemistry Engineering Science,2007,62(1):2-27.
[14] LAU Y M,DEEN N G,KUIPERS J A M. Development of an image measurement technique for size distribution in dense bubbly flows[J]. Chemical Engineering Science,2013,94:20-29.
[15] KARN A,ELLIS C,ARNDT R,et al. An integrative image measurement technique for dense bubbly flows with a wide size distribution[J]. Chemical Engineering Science,2015,122:240-249.
[16] XIAO Q,PAN J,XU J,et al. Hypothesis-testing combined with image analysis to quantify evolution of bubble swarms in a direct-contact boiling heat transfer process[J]. Applied Thermal Engineering,2016,113:851-857.
[17] XIAO Q,XU J,WANG H. Quantifying the evolution of flow boiling bubbles by statistical testing and image analysis:toward a general model[J]. Scientific Reports,2016,6:31548.
[18] XIAO Q,WANG S,ZHANG Z,et al. Analysis of sunspot time series (1749-2014)by means of 0-1 test for chaos detection[C]//The 11th International Conference on Computational Intelligence and Security,2015:215-218. |