化工进展 ›› 2021, Vol. 40 ›› Issue (8): 4406-4412.DOI: 10.16085/j.issn.1000-6613.2020-1745

• 材料科学与技术 • 上一篇    下一篇

聚苯胺/聚乳酸复合纳米纤维表面形貌对生物相容性的影响

刘荣涛1(), 张诗洋1, 黄兴文1, 朋小康1, 闵永刚1,2()   

  1. 1.广东工业大学材料与能源学院,广东 广州 510006
    2.东莞华南设计创新院,广东 东莞 523808
  • 收稿日期:2020-09-01 出版日期:2021-08-05 发布日期:2021-08-12
  • 通讯作者: 闵永刚
  • 作者简介:刘荣涛(1990—),男,博士研究生,研究方向为功能高分子合成及改性。E-mail:liu44101@163.com
  • 基金资助:
    广东省引进创新创业人才项目(2016ZT06C412);广东工业大学百人计划(220418095)

Effect of biocompatibility on surface morphology of polyaniline/polylactic acid composite nanofibers

LIU Rongtao1(), ZHANG Shiyang1, HUANG Xingwen1, PENG Xiaokang1, MIN Yonggang1,2()   

  1. 1.School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, Guangdong, China
    2.Dongguan South China Design Innovation Institute, Dongguan 523808, Guangdong, China
  • Received:2020-09-01 Online:2021-08-05 Published:2021-08-12
  • Contact: MIN Yonggang

摘要:

外加电场作用下聚苯胺能够调节细胞附着、增殖、迁移和分化,在体液环境下发生脱掺杂会使聚苯胺基导电可降解纳米纤维电活性减弱,但在一定程度上仍能促进细胞的黏附、生长和增殖。本文选择酒石酸作为聚苯胺在等离子体处理后的聚乳酸纳米纤维表面原位聚合过程中的酸掺杂剂,考察酒石酸与苯胺摩尔比分别在1∶1, 1∶2和1∶4下不同形貌的聚苯胺/聚乳酸复合纳米纤维对生物相容性的影响。采用SEM、TEM和FTIR表征聚苯胺形貌及化学成分,接触角评价其润湿性,MTT、ALP和免疫荧光染色评价聚苯胺/聚乳酸复合纳米纤维生物相容性。结果表明,酒石酸与苯胺摩尔比在1∶1、1∶2和1∶4下的聚苯胺形貌分别为纳米颗粒状、纳米纤维状和纳米空心管状,聚苯胺附着在聚乳酸纳米纤维表面,不会对静电纺丝的多孔结构基体产生影响;聚苯胺/聚乳酸复合纳米纤维表面润湿性良好,有助于细胞的黏附和生长;纳米纤维状的聚苯胺对生物相容性的增强效果明显优于纳米颗粒状聚苯胺,而纳米空心管状结构的聚苯胺对生物相容性增强作用更佳。

关键词: 聚苯胺/聚乳酸复合纳米纤维, 表面形貌, 生物相容性, 酒石酸掺杂

Abstract:

Polyaniline (PANI) can regulate cell adhesion, proliferatio, and differentiation under the external electric field. However, the electrical activity of polyaniline based degradable nanofibers will be weakened because of PANI dedoped in the body physiological environment. Yet it could promote the cell adhesion, growth and proliferation. In this paper, tartaric acid was selected as the acid dopant in the in-situ polymerization of polyaniline on the surface of polylactic acid (PLA) nanofibers after plasma treatment. The effects of different morphologies of polyaniline/polylactic acid (PANI/PLA) composite nanofibers with the different molar ratio of tartaric acid to aniline at 1∶1, 1∶2 and 1∶4 were investigated. The morphology and chemical composition of polyaniline were characterized by SEM, TEM and FTIR. The wettability was evaluated by contact angle. The biocompatibility of PANI/PLA composite nanofibers was evaluated by MTT, ALP and immunofluorescence staining. The results showed that the morphology of polyaniline with the molar ratio of tartaric acid to aniline at 1∶1, 1∶2, and 1∶4 was nanoparticles, nanofiber and nano-hollow tubes, respectively. PANI attached to the surface of PLA nanofibers did not affect the porous structure of electrospinning. The surface wettability of PANI/PLA composite nanofibers was excellent, which was helpful for cell adhesion and growth. The biocompatibility of nanofiber polyaniline was better than that of nanoparticle polyaniline, and the effect of nano-hollow tubular polyaniline on biocompatibility was much better.

Key words: polyaniline/polylactic acid composite nanofiber, surface morphology, biocompatibility, tartaric acid doping

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn