现代化工仿真技术的发展与应用

化工进展 ›› 2015, Vol. 34 ›› Issue (s1): 18-21.

现代化工仿真技术的发展与应用

覃亮, 邓德茹, 王聪敏, 陈立广, 郭宁, 冯文强

防化研究院, 北京 102205

出版日期:2015-09-20 发布日期:2015-10-20
通讯作者: 邓德茹,高级工程师,硕士生导师,主要从事过程工程仿真技术研究。E-mail dengdr@263.net。
作者简介:覃亮(1990—),男,硕士研究生,主要从事过程仿真技术研究。E-mail liangqin@mail.nwpu.edu.cn。

Development and application of modern chemical simulation technology

QIN Liang, DENG Deru, WANG Congmin, CHEN Liguang, GUO Ning, FENG Wenqiang

Research Institute of Chemical Defense, Beijing 102205, China

Online:2015-09-20 Published:2015-10-20

摘要/Abstract

摘要： 化工生产过程普遍存在间歇过程多、自动化程度低、工艺复杂、条件苛刻、危险性高等特点。传统的过程研究及开发手段风险大、周期长,需要消耗大量的人力、物力、财力。而利用现代仿真技术建立一套虚拟生产系统,人们可在没有危险的情况下从事相关科研工作;节省实际研究中所需的高额成本;动态搭建并分析反应流程,优化工艺参数,加快整个化工生产研究的进程;与搭建的流程进行人机交互,实时观察各相关设备的工作状态和反应现象;可人为设置故障点,或改变工艺参数, 为应急演练和操作培训提供一种新的思路和实践;为开展化工流程模拟、仿真培训与生产过程可视化监控提供有效的支持。本文介绍了最近国内外在现代化工仿真技术领域取得的进展并探讨了其未来的发展趋势。

关键词: 现代化工仿真技术, 虚拟现实, 应急演练, 过程模拟

Abstract: Most chemical production process is intermittent, with the low degree of automation, high process complexity, strict conditions, high risk, etc.The traditional means of research and development is of high risk, cycle is long, and need to consume large amounts of manpower, material resources and financial resources.However, modern simulation technology is used to establish a set of virtual manufacturing system, people can work in the relevant scientific research out of danger; save the high costs which is required in practical research; dynamic structures and analysis reaction process, optimize process parameters, accelerate the research process of chemical production; have human-computer interaction with the built process,observe the working condition and reaction phenomenon of related equipment in real time; point of failure can be set and the process parameters can be changed artificially, also provides a new thinking and practice for operation training and emergency drill; to provide effective support for the chemical process simulation and the three-dimensional monitoring of production process.This paper introduces the recent progress in the field of modern chemical simulation technology at home and abroad and discusses its development trend.

Key words: modern chemical simulation technology, virtual reality, simulation training system, process simulation

覃亮, 邓德茹, 王聪敏, 陈立广, 郭宁, 冯文强. 现代化工仿真技术的发展与应用[J]. 化工进展, 2015, 34(s1): 18-21.

QIN Liang, DENG Deru, WANG Congmin, CHEN Liguang, GUO Ning, FENG Wenqiang. Development and application of modern chemical simulation technology[J]. Chemical Industry and Engineering Progree, 2015, 34(s1): 18-21.

参考文献

[1] 屈一新.化工过程数值模拟及软件[M].北京:高等教育出版社,2006: 46-48.

[2] 孙红先,赵听友,蔡冠梁.化工模拟软件的应用与开发[J].计算机与应用化学,2007(9):1285-1288.

[3] 康译友.三维交互虚拟精馏实验室的构建技术研究[D].大连:大连理工大学,2010.

[4] 夏迎春,吴重光,张贝克,等.现代化工仿真训练工厂[J].系统仿真学报,2010,22(2):370-375.

[5] 王俊杰,蔡智聪,朱群雄.虚拟工厂安全仿真系统设计与实现[J].计算机与应用化学,2011,28(3):338-342.

[6] 刘进.化工厂火灾和爆炸过程的模拟以及事故仿真处理系统的研究[D].北京:北京理工大学,2012.

[7] 吴凤仪,万新军.基于网络虚拟化工实习平台开发与应用[J].计算机与应用化学,2013,30(12):1517-1520.

[8] 相茂英,马纯永,韩勇,等.基于Unity3D的化工设备虚拟培训系统研究[J].计算机技术与发展,2014,24(7):196-200.

[9] 冯磊,徐圆,林晓勇.基于灾害仿真的虚拟应急演练系统[J].计算机系统应用,2015,24(1):42-48.

[10] 东风仿真公司.PISP 3.0+整合3D虚拟现实仿真开发平台已经开发完成[OL].[2015-05-24](2010-06-03).http://www.besct.com/ArticleDetail.aspx?type=1&id =53.

[11] Davide Manca, Sara Brambilla, Simone Colombo.Bridging between Virtual Reality and accident simulation for training of process-industry operators[J].Advances in Engineering Software,2013,55:1-9.

[12] Charles R Nippert,Byung-Hwan Um.A comparison of learning outcomes between experiments using virtual reality and actual hands on experiments-What is real enough? [C]//Proceedings of 118th ASEE Annual Conference and Exposition,Vancouver,BC,Canada,2011.

[13] Abdul Rahim,Elin,Duenser,et al.A desktop virtual reality application for chemical and process engineering education[C]//Proceedings of the 24th Australian Computer-Human Interaction Conference,Melbourne,VIC,Australia,2012:1-8.

[14] Schofield D,Lester E.Virtual chemical engineering: Guidelines for e-learning in engineering education[J].International Journal of Media, Technology & Lifelong Learning, 2010,6(1):1-10.