化工进展 ›› 2016, Vol. 35 ›› Issue (S1): 35-40.DOI: 10.16085/j.issn.1000-6613.2016.s1.007

• 化工过程与装备 • 上一篇    下一篇

FST高效塔板传质元件内气相流场的数值模拟

胡丞1, 张龙1, 张英1, 朱怀工2, 陈迓宾2   

  1. 1. 中国石油化工股份有限公司抚顺石油化工研究院, 辽宁 抚顺 113001;
    2. 天津大学, 天津 300072
  • 收稿日期:2016-01-12 修回日期:2016-02-15 出版日期:2016-06-30 发布日期:2016-07-08
  • 通讯作者: 张龙,高级工程师。E-mail zhanglong.fshy@sinopec.com。
  • 作者简介:胡丞(1988-),男,硕士,助理工程师。

CFD simulation of FST tray gas phase flow field

HU Cheng1, ZHANG Long1, ZHANG Ying1, ZHU Huaigong2, CHEN Yabin2   

  1. 1. Fushun Research Institute of Petroleum and Petrochemicals, SINOPEC, Fushun 113001, Liaoning, China;
    2. Tianjin University, Tianjin 300072, China
  • Received:2016-01-12 Revised:2016-02-15 Online:2016-06-30 Published:2016-07-08

摘要: FST高效塔板是一种喷射型塔板,同鼓泡型塔板相比,具有高通量、低压降等特点。塔板传质元件的结构会很大的影响塔板的传质效率和压降,为了优化塔板结构设计,提升塔板性能,有必要研究不同结构传质元件的效果。本文使用FLUENT软件对FST高效塔板传质元件开展数值模拟研究,得到传质元件内部气相流场,对比了3种结构传质元件内部气相流场的分布情况,考察了除雾叶片、旋流叶片径向角对气相流场的影响。结果显示除雾叶片会增强传质元件的除雾效果,降低塔板的雾沫夹带,但也会带来额外的塔压降。旋流叶片径向角会增强气相旋流强度,强化传质效果,但是也会带来压降过大、回流过大的问题。为优化设计塔板传质元件,应综合考虑各结构因素的影响,合理平衡塔板压降与传质效果、除雾效果。

关键词: FST高效塔板, 数值模拟研究, 气相流场

Abstract: FST tray is one kind of spray tray.Comparing with bubble tray, it has higher flux and lower pressure drop.The tray structure influences mass transfer efficiency and pressure drop of the tray.In order to increase tray performance, different tray structures need to be investigated.A CFD model was developed by FLUENT to predict the gas phase flow field of FST tray.The gas phase flow fields of three different tray structures were compared and the effects of demist vanes and radial direction angle of rotating stream vanes were investigated.Results showed that demist vanes could decrease entrainment rate, but caused extra pressure drop.Rotating stream vanes with radial direction angle could increased swirling intensity, and enhanced mass transfer performance.However it would also increase pressure drop and backflow.Hence, in order to achieve optimal design, effects of structures should be considered comprehensively, and balance tray pressure drop, mass transfer performance and demist performance.

Key words: FST tray, computational fluid dynamics simulation, gas phase flow field

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn