化工进展

• 材料科学与技术 • 上一篇    下一篇

紫外光固化光敏涂料的研制

唐 铭,王 姝   

  1. 营口市产品质量监督检验所
  • 出版日期:2010-06-05 发布日期:2010-06-05

Preparation of UV-curable epoxy-acrylate photosensitive coating

TANG Ming,WANG Shu   

  1. Product Quality Supervision Institute
  • Online:2010-06-05 Published:2010-06-05

摘要: 紫外光固化光敏涂料技术对被固化对象、固化深度和胶黏剂都有一定的要求,因此不能很好地适应高速自动化生产线的要求。本研究以三苯基磷为催化剂、双酚A型环氧树脂和丙烯酸为反应原料制得了环氧丙烯酸光敏树脂,再与活性稀释剂、光敏剂配制成环氧丙烯酸酯光敏涂料。对环氧树脂和丙烯酸的摩尔比、温度、投料方式等因素对合成反应的影响进行了深入研究,对光敏剂对涂料性能的影响也进行了分析,并且得出了合理的使用条件,为紫外光固化光敏涂料技术的应用发展提供了一个新思路。

Abstract: UV-curable photosensitive coating technology has special requirements to the object being cured,the curing depth and adhesives,especially for that applied in high-speed automated production lines. On the basis of defect analysis of this technology,the present paper reports the preparation of UV-curable epoxy-acrylic photosensitive resin using epoxy resin and acrylic acid as starting materials,triphenylphosphine as catalyst,and p-benzenediol as inhibitor. Then epoxy-acrylate photosensitive coating was compounded by mixing the resin,reactive diluent and photosensitizer. Influences of the mole ratio,the feeding mode and temperature on resin synthesis,as well as the impact of sensitizer on coating behabiour are also discussed.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn