化工进展

• 应用技术 • 上一篇    下一篇

合成革生产废水中DMF的节能回收新工艺

赵舜华,宋锡瑾,张景铸,刘书庆,裴 宁   

  1. 浙江禾欣实业集团股份有限公司;浙江大学化学工程与生物工程系;烟台东洁环保机械工程有限公司
  • 出版日期:2007-09-25 发布日期:2007-09-25

Energy-saving recovery process of DMF from synthetic leather waster water

ZHAO Shunhua,SONG Xijin,ZHANG Jingzhu,LIU Shuqin,PEI Ning   

  1. Zhejiang Hexin Industry Group Co.; Department of Chemical & Biochemical Engineering,Zhejiang University;Yantai Dongjie Environmental Protection Machine Engineering Co
  • Online:2007-09-25 Published:2007-09-25

摘要: 提出了从聚氨酯合成革生产废水中回收N,N-二甲基甲酰胺的节能新工艺。该工艺充分利用现有的低压蒸汽为热媒,在现有双塔回收工艺的基础上进行改进,由一级减压浓缩、二级常压浓缩、减压精馏三塔组成,热能循环使用,比现有双塔回收装置综合能耗下降37.7%,废水可以达到零排放,所得DMF 产品的纯度99%以上。该工艺运行稳定,每套装置年收益达496.19万元。

Abstract: A new three-column energy-saving technique to recover N,N-dimethylformamide(DMF)from the polyurethane(PU)synthetic leather process was developed by rebuilding a two-column recovery system. This process was composed of three columns,including first-stage vacuum concentration,second-stage atmospheric concentration,and vacuum distillation. Because heat energy was reused,the energy-saving recovery equipment could reduce energy consumption by 37.7%,compared to the current two-column equipment. No waster water was discharged in the process,and the purity of DMF product was above 99%. The profit of each energy-saving unitt could reach 4 961 900 yuan each year .

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn