化工进展

• 研究开发 • 上一篇    下一篇

多孔波纹板错流旋转床的传质性能

焦纬洲,刘有智,刁金祥,康荣璨,刘振河   

  1. 中北大学山西省超重力化工工程技术研究中心
  • 出版日期:2006-02-25 发布日期:2006-02-25

Mass-transfer characteristics of cross-flow rotating bed with
protruded ripple plate packing

JIAO Weizhou,LIU Youzhi,DIAO Jinxiang,KANG Rongcan,LIU Zhenhe   

  1. Research Center of Shanxi Province for High Gravity Chemical Engineering and Technology,
    North University of China
  • Online:2006-02-25 Published:2006-02-25

摘要: 以CO2-NaOH为介质,研究了两种板间距填料结构的传质性能。结果表明:多孔波纹板错流旋转床的体积传质系数在相近的操作条件下分别比文献丝网错流旋转床高0.95~2.1倍、比逆流旋转床略低,比传统气液传质设备高1~2个数量级。应用MATLAB语言编制应用程序对实验数据的回归分析得出了体积传质系数的关联式。

Abstract: Mass-transfer performance of two packing structures was investigated with the CO2-NaOH system. The results showed that the volumetric mass-transfer coefficient of cross-flow rotating bed with protruded ripple plate packing was 0.95~2.1 higher times than that in the cross-flow rotating bed with wire –gauze packing,and was slightly less than the countercurrent rotating bed and was 1~2 orders of magnitude higher than the conventional gas-liquid mass-transfer equipments under the same operational condition,respectively. Through the experimental date,correlative expression of the volumetric mass-transfer coefficient was obtained with MATLAB program.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn