化工进展

• 工业催化 • 上一篇    下一篇

芳樟醇减压精馏残液合成四氢芳樟醇工艺

翁羽飞,郭世卓,朱瑶洁,孙 超,王雅辉,奚 军   

  1. 中国石化上海石油化工股份有限公司化工研究所
  • 出版日期:2010-05-05 发布日期:2010-05-05

Synthesis of tetrahydrolinalool from the residue of linalool rectification

WENG Yufei,GUO Shizhuo,ZHU Yaojie,SUN Chao,WANG Yahui,XI Jun   

  1. The Chemical Research Institute of Shanghai Petrochemical Co. Ltd.
  • Online:2010-05-05 Published:2010-05-05

摘要: 以脱氢芳樟醇选择性加氢合成芳樟醇减压精馏残液为原料,在不同反应温度、氢气压力、催化剂用量等实验条件下,考察Lindlar催化剂、Raney Ni、5%Pd/C对残液中的芳樟醇、二氢芳樟醇加氢反应合成四氢芳樟醇的影响,通过GC/MS、1H NMR确定了反应主要产物。以5%Pd/C为催化剂,反应温度90~92 ℃,氢气压力2.0 MPa,反应时间4 h,m(催化剂)∶m(芳樟醇减压精馏残液)=1.2∶100 ,残液中的芳樟醇、二氢芳樟醇质量分数分别为59.2%、38.3% ,残液合成四氢芳樟醇反应收率96.3%,反应液中的四氢芳樟醇质量分数为96.5% 。

Abstract: A process for the synthesis of tetrahydrolinalool from the residue of linalool rectification was studied. The residue contains dihydrolinalool and linalool. The synthetic process was investigated under different conditions of temperature,hydrogen pressure and the weight ratio of catalyst to reactant. Catalyst is the Lindlar catalyst,Raney Ni and 5%Pd/C. The main components of product were determined by GC/MS or 1H NMR spectra. With reaction conditions of temperature 90~92 ℃ and hydrogen pressure 2.0MPa for 4h,tetrahydrolinalool was obtained in 96.3% yield and 96.5% purity from the residue containing 38.3% dihydrolinalool and 59.2% linalool under the catalysis of 5%Pd/C.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn