Chemical Industry and Engineering Progress ›› 2021, Vol. 40 ›› Issue (6): 3300-3313.DOI: 10.16085/j.issn.1000-6613.2020-1310

• Materials science and technology • Previous Articles     Next Articles

Ag/graphene-based flexible pressure sensors-preparation of the nanocomposites and the construction of the micro-nanostructures

WANG Zhigang(), XU Qinqin(), LIN Runze, YIN Jianzhong, LIU Baolin, WANG Qibo   

  1. School of Chemical Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
  • Received:2020-07-10 Revised:2020-10-09 Online:2021-06-22 Published:2021-06-06
  • Contact: XU Qinqin

基于银/石墨烯纳米复合材料的柔性压力传感器——材料制备和微纳结构构建

王志刚(), 徐琴琴(), 林润泽, 银建中, 柳宝林, 王启博   

  1. 大连理工大学化工学院,辽宁 大连 116024
  • 通讯作者: 徐琴琴
  • 作者简介:王志刚(1994—),男,硕士研究生,研究方向为柔性压力传感器。E-mail:bh897571@mail.dlut.edu.cn
  • 基金资助:
    国家自然科学基金(21978043);中央高校基本科研业务费(DUT20JC36)

Abstract:

Flexible pressure sensors are the core components of flexible and wearable electronics, which have shown great potential applications in such fields as health care, sports fitness and safety production. Because of the remarkable carrier mobility, high specific surface area and mechanical strength, graphene is considered as an excellent 2D material for flexible pressure sensors. However, due to the grain boundaries and overlap defects between graphene flakes, flexible pressure sensors made by pure graphene have the disadvantages of low sensitivity, poor stability, narrow sensing range, etc. When graphene and 0D silver nanoparticles or 1D silver nanowires were used as composite conductive material, Ag nanostructures can cross the defect and bridge the adjacent graphene sheets. In the meanwhile, graphene sheets are tiled between Ag conductive network and patched it up. This review introduced the preparation of Ag/graphene for flexible pressure sensors and the fabrication of construction with different micro-nanostructures.

Key words: graphene, nano silver, flexible pressure sensor, composite, micro-nanostructure

摘要:

柔性压力传感器是柔性可穿戴设备的核心部件,在医疗保健、运动健身、安全生产等领域极具应用潜力。二维材料石墨烯具有高载流子迁移率、超大比表面积和超高机械强度,被视为制备柔性压力传感器的优良敏感材料。然而石墨烯碎片引入晶界或堆叠等缺陷,用纯石墨烯制备柔性压力传感器存在灵敏度低、稳定性差、响应范围窄等问题。将零维银纳米颗粒或一维银纳米线与石墨烯构建复合材料,可有效跨越缺陷或搭接相邻片层,起到“桥梁”作用,石墨烯片层平铺到纳米银导电网络之间,起到“补丁”作用。本文综述了用于柔性电阻式压力传感器的银/石墨烯复合材料制备方法和工艺,并介绍了不同微纳结构的传感器构建方法。

关键词: 石墨烯, 纳米银, 柔性压力传感器, 复合材料, 微纳结构

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd