Research progress on heat transfer enhancement methods for medium temperature latent heat thermal energy storage systems

doi:10.16085/j.issn.1000-6613.2019-0160

Abstract

Abstract:

The medium temperature latent heat thermal energy storage systems have extensive research and application prospects in the fields of solar heat utilization and waste heat recovery, but the low thermal conductivity of the phase change materials seriously weaken the thermal response rate and heat storage and release efficiency of the latent heat thermal energy storage systems. In order to solve this problem, this paper summarizes the heat transfer enhancement methods of medium temperature latent heat thermal energy storage systems in recent years from three aspects: increasing heat transfer coefficient, expanding heat transfer area and increasing average temperature difference. It can be seen from the analysis that the carbon-based filler has the advantages of higher thermal conductivity, lower cost and lower density than the metal-based filler. The direct latent heat thermal energy storage system is light in weight and high in heat transfer efficiency, and is suitable for use in mobile phase change heat storage vehicles. The cascade latent heat thermal energy storage system conforms to the energy cascade utilization concept and has high heat storage and release efficiency. In the future research, there is still important research potential and value in further modification of the heat conduction reinforcing filler, direct latent heat thermal energy storage system, cascade latent heat thermal energy storage system and the effect of heat transfer enhancement and the mechanism of synergistic enhancement of various heat transfer enhancement methods.

Key words: phase change, thermal heat energy storage, heat transfer, composites, cascaded heat storage

摘要：

中温相变蓄热系统在太阳能热利用、余热回收等领域有广泛的研究与应用前景，但相变材料较低的热导率严重削弱了相变蓄热系统的热响应速率和蓄放热效率。针对这一问题，本文从提高传热系数、拓展传热面积、增大平均温差3个方面对近年来中温相变蓄热系统强化传热方法进行了综述。通过分析可以看出，通过导热增强填料对相变材料进行改性时，应注意填料对导热和对流的共同作用，综合考虑填料对热导率、蓄放热时间等性能的影响；直接式相变蓄热系统重量轻，传热效率高，适合应用在移动式相变蓄热车中；梯级相变蓄热系统符合能量梯级利用理念，蓄放热效率高。在未来研究中，对导热增强填料的进一步改性、直接式相变蓄热系统、梯级相变蓄热系统及多种技术协同强化传热的作用机理和强化传热效果还有重要研究潜力与价值。

关键词: 相变, 蓄热, 传热, 复合材料, 梯级蓄热

CLC Number:

TK02

Zhaosheng YANG,Qunli ZHANG,Wenjing ZHANG,Hongsheng ZONG. Research progress on heat transfer enhancement methods for medium temperature latent heat thermal energy storage systems[J]. Chemical Industry and Engineering Progress, 2019, 38(10): 4389-4402.

杨兆晟,张群力,张文婧,宗弘盛. 中温相变蓄热系统强化传热方法研究进展[J]. 化工进展, 2019, 38(10): 4389-4402.

Figures/Tables 8

References 82

1	彭犇, 岳昌盛, 邱桂博, 等 . 相变储能材料的最新研究进展与应用 [J]. 材料导报, 2018, 32(s1): 248-252.
	PENG Ben , YUE Changsheng , QIU Guibo , et al . The recent research progress and application of phase change and energy storage materials [J]. Materials Reports, 2018, 32(s1): 248-252.
2	NAZIR H , BATOOL M , BOLIVAR OSORIO F J , et al . Recent developments in phase change materials for energy storage applications: a review [J]. International Journal of Heat and Mass Transfer, 2019, 129: 491-523.
3	DENG Yong , LI Jinhong , QIAN Tingting , et al . Thermal conductivity enhancement of polyethylene glycol/expanded vermiculite shape-stabilized composite phase change materials with silver nanowire for thermal energy storage [J]. Chemical Engineering Journal, 2016, 295: 427-435.
4	GHOSSEIN R M AL , HOSSAIN M S , KHODADADI J M . Experimental determination of temperature-dependent thermal conductivity of solid eicosane-based silver nanostructure-enhanced phase change materials for thermal energy storage [J]. International Journal of Heat and Mass Transfer, 2017, 107: 697-711.
5	CUI Wenlong , YUAN Yanping , SUN Liangliang , et al . Experimental studies on the supercooling and melting/freezing characteristics of nano-copper/sodium acetate trihydrate composite phase change materials [J]. Renewable Energy, 2016, 99: 1029-1037.
6	华维三, 章学来, 罗孝学, 等 . 纳米金属/石蜡复合相变蓄热材料的实验研究[J]. 太阳能学报, 2017, 38(6): 1723-1728.
	HUA Weisan , ZHANG Xuelai , LUO Xiaoxue , et al . Experimental study of nanometal-paraffin composite phase change heat storage material [J]. Acta Energiae Solaris Sinica, 2017, 38(6): 1723-1728.
7	SHARMA R K , GANESAN P , TYAGI V V , et al . Thermal properties and heat storage analysis of palmitic acid-TiO₂ composite as nano-enhanced organic phase change material (NEOPCM) [J]. Applied Thermal Engineering, 2016, 99: 1254-1262.
8	SAHAN N , FOIS M , PAKSOY H . Improving thermal conductivity phase change materials — A study of paraffin nanomagnetite composites [J]. Solar Energy Materials and Solar Cells, 2015, 137: 61-67.
9	BABAPOOR A , KARIMI G . Thermal properties measurement and heat storage analysis of paraffin nanoparticles composites phase change material: comparison and optimization [J]. Applied Thermal Engineering, 2015, 90: 945-951.
10	WANG Changhong , LIN Tao , LI Na , et al . Heat transfer enhancement of phase change composite material: copper foam/paraffin [J]. Renewable Energy, 2016, 96: 960-965.
11	WANG Zichen , ZHANG Zhuqian , JIA Li , et al . Paraffin and paraffin/aluminum foam composite phase change material heat storage experimental study based on thermal management of Li-ion battery [J]. Applied Thermal Engineering, 2015, 78: 428-436.
12	HUSSAIN A , TSO C Y, CHAO C Y H . Experimental investigation of a passive thermal management system for high-powered lithium ion batteries using nickel foam-paraffin composite [J]. Energy, 2016, 115: 209-218.
13	ZHANG P , MENG Z N , ZHU H , et al . Melting heat transfer characteristics of a composite phase change material fabricated by paraffin and metal foam [J]. Applied Energy, 2017, 185: 1971-1983.
14	LI T X , WU D L , HE F , et al . Experimental investigation on copper foam/hydrated salt composite phase change material for thermal energy storage [J]. International Journal of Heat and Mass Transfer, 2017, 115: 148-157.
15	HUANG Xiang , LIN Yaxue , ALVA G , et al . Thermal properties and thermal conductivity enhancement of composite phase change materials using myristyl alcohol/metal foam for solar thermal storage [J]. Solar Energy Materials and Solar Cells, 2017, 170: 68-76.
16	XIAO X , ZHANG P , LI M . Effective thermal conductivity of open-cell metal foams impregnated with pure paraffin for latent heat storage [J]. International Journal of Thermal Sciences, 2014, 81: 94-105.
17	TAO Y B , YOU Y , HE Y L . Lattice Boltzmann simulation on phase change heat transfer in metal foams/paraffin composite phase change material [J]. Applied Thermal Engineering, 2016, 93: 476-485.
18	袁维烨, 章学来, 华维三, 等 . 膨胀石墨/三水乙酸钠复合相变材料储热的性能 [J]. 化工进展, 2018, 37(11): 4405-4411.
	YUAN Weiye , ZHANG Xuelai , HUA Weisan , et al . Thermal storage performance of sodium acetate trihydrate/expanded graphite composite phase change material [J]. Chemical Industry and Engineering Progress, 2018, 37(11): 4405-4411.
19	SHAH K W . A review on enhancement of phase change materials: a nanomaterials perspective [J]. Energy and Buildings, 2018, 175: 57-68.
20	KARAIPEKLI A , BIÇER A , SARI A , et al . Thermal characteristics of expanded perlite/paraffin composite phase change material with enhanced thermal conductivity using carbon nanotubes [J]. Energy Conversion and Management, 2017, 134: 373-381.
21	邹得球, 马先锋, 刘小诗, 等 . 石墨烯在相变材料中的研究进展[J]. 化工进展, 2017, 36(5): 1743-1754.
	ZOU Deqiu , MA Xianfeng , LIU Xiaoshi , et al . Research progress on graphene in phase change materials [J]. Chemical Industry and Engineering Progress, 2017, 36(5): 1743-1754.
22	HARISH S , OREJON D , TAKATA Y , et al . Enhanced thermal conductivity of phase change nanocomposite in solid and liquid state with various carbon nano inclusions [J]. Applied Thermal Engineering, 2017, 114: 1240-1246.
23	DSILVA W R D , SUGANTHI L , INIYAN S , et al . Effects of nanoparticle-enhanced phase change material (NPCM) on solar still productivity [J]. Journal of Cleaner Production, 2018, 192: 9-29.
24	LIU Lin , ZHENG Ke , YAN Yang , et al . Graphene aerogels enhanced phase change materials prepared by one-pot method with high thermal conductivity and large latent energy storage [J]. Solar Energy Materials and Solar Cells, 2018, 185: 487-493.
25	SHEN Shile , TAN Shujuan , WU Sai , et al . The effects of modified carbon nanotubes on the thermal properties of erythritol as phase change materials [J]. Energy Conversion and Management, 2018, 157: 41-48.
26	ZHOU Mingzheng , XIA Guodong , LI Jian , et al . Analysis of factors influencing thermal conductivity and viscosity in different kinds of surfactant solutions [J]. Experimental Thermal and Fluid Science, 2012, 36: 22-29.
27	TAO Y B , LIN C H , HE Y L . Effect of surface active agent on thermal properties of carbonate salt/carbon nanomaterial composite phase change material [J]. Applied Energy, 2015, 156: 478-489.
28	LIU Yushi , YANG Yingzi . Form-stable phase change material based on Na₂CO₃·10H₂O-Na₂HPO₄·12H₂O eutectic hydrated salt/expanded graphite oxide composite: the influence of chemical structures of expanded graphite oxide [J]. Renewable Energy, 2018, 115: 734-740.
29	XIAO Qiangqiang , YUAN Wenhui , LI Li , et al . Fabrication and characteristics of composite phase change material based on Ba(OH)₂·8H₂O for thermal energy storage [J]. Solar Energy Materials and Solar Cells, 2018, 179: 339-345.
30	ZHOU Siyu , ZHOU Yan , LING Ziye , et al . Modification of expanded graphite and its adsorption for hydrated salt to prepare composite PCMs [J]. Applied Thermal Engineering, 2018, 133: 446-451.
31	PUTRA N , RAWI S , AMIN M , et al . Preparation of beeswax/multi-walled carbon nanotubes as novel shape-stable nanocomposite phase-change material for thermal energy storage [J]. Journal of Energy Storage, 2019, 21: 32-39.
32	HAN Liang , JIA Xilai , LI Zhimin , et al . Effective encapsulation of paraffin wax in carbon nanotube agglomerates for a new shape-stabilized phase change material with enhanced thermal-storage capacity and stability [J]. Industrial & Engineering Chemistry Research, 2018, 57(39): 13026-13035.
33	陈素清, 黄国波, 鲍建设, 等 . 石墨烯导热增强相变储能材料的制备及性能[J]. 新型炭材料, 2018(3): 262-267.
	CHEN Suqing , HUANG Guobo , BAO Jianshe ,et al . Preparation and thermal properties of a phase change material modified by a functionalized reduced graphene oxide [J]. New Carbon Materials, 2018(3): 262-267.
34	GAO Liuhua , ZHAO Jun , AN Qingsong , et al . Experiments on thermal performance of erythritol/expanded graphite in a direct contact thermal energy storage container [J]. Applied Thermal Engineering, 2017, 113: 858-866.
35	LI Tingxian , LEE J H, WANG Ruzhu , et al . Heat transfer characteristics of phase change nanocomposite materials for thermal energy storage application [J]. International Journal of Heat and Mass Transfer, 2014, 75: 1-11.
36	AGARWAL A , SARVIYA R M . An experimental investigation of shell and tube latent heat storage for solar dryer using paraffin wax as heat storage material [J]. Engineering Science and Technology, an International Journal, 2016, 19(1): 619-631.
37	WANG Yifei , WANG Liang , XIE Ninging , et al . Experimental study on the melting and solidification behavior of erythritol in a vertical shell-and-tube latent heat thermal storage unit [J]. International Journal of Heat and Mass Transfer, 2016, 99: 770-781.
38	ELBAHJAOUI R , QARNIA H EL . Numerical study of a shell-and-tube latent thermal energy storage unit heated by laminar pulsed fluid flow [J]. Heat Transfer Engineering, 2016, 38(17): 1466-1480.
39	WANG Weilong , GUO Shaopeng , LI Hailong , et al . Experimental study on the direct/indirect contact energy storage container in mobilized thermal energy system (M-TES) [J]. Applied Energy, 2014, 119: 181-189.
40	WANG Weilong , LI Hailong , GUO Shaopeng , et al . Numerical simulation study on discharging process of the direct-contact phase change energy storage system [J]. Applied Energy, 2015, 150: 61-68.
41	NOMURA T , TSUBOTA M , OYA T, et al . Heat storage in direct-contact heat exchanger with phase change material [J]. Applied Thermal Engineering, 2013, 50(1): 26-34.
42	NOMURA T , TSUBOTA M , OYA T, et al . Heat release performance of direct-contact heat exchanger with erythritol as phase change material [J]. Applied Thermal Engineering, 2013, 61(2): 28-35.
43	NOMURA T , TSUBOTA M , OKINAKA N , et al . Improvement on heat release performance of direct-contact heat exchanger using phase change material for recovery of low temperature exhaust heat [J]. ISIJ International, 2015, 55(2): 441-447.
44	GUO Shaopeng , ZHAO Jun , WANG Weilong , et al . Experimental study on solving the blocking for the direct contact mobilized thermal energy storage container [J]. Applied Thermal Engineering, 2015, 78: 556-564.
45	RATHOD M K , BANERJEE J . Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins [J]. Applied Thermal Engineering, 2015, 75: 1084-1092.
46	SHEIKHOLESLAMI M , LOHRASBI S , GANJI D D . Numerical analysis of discharging process acceleration in LHTESS by immersing innovative fin configuration using finite element method [J]. Applied Thermal Engineering, 2016, 107: 154-166.
47	LOHRASBI S , SHEIKHOLESLAMI M , GANJI D D . Multi-objective RSM optimization of fin assisted latent heat thermal energy storage system based on solidification process of phase change material in presence of copper nanoparticles [J]. Applied Thermal Engineering, 2017, 118: 430-447.
48	TAO Y B , HE Y L . Effects of natural convection on latent heat storage performance of salt in a horizontal concentric tube [J]. Applied Energy, 2015, 143: 38-46.
49	YUAN Yanping , CAO Xiaoling , XIANG Bo , et al . Effect of installation angle of fins on melting characteristics of annular unit for latent heat thermal energy storage [J]. Solar Energy, 2016, 136: 365-378.
50	WANG Weiwei , WANG Liangbi , HE Yaling . Parameter effect of a phase change thermal energy storage unit with one shell and one finned tube on its energy efficiency ratio and heat storage rate [J]. Applied Thermal Engineering, 2016, 93: 50-60.
51	KUBOTH S , KÖNIG-HAAGEN A , BRÜGGEMANN D . Numerical analysis of shell-and-tube type latent thermal energy storage performance with different arrangements of circular fins [J]. Energies, 2017, 10(3): 274.
52	DHAIDAN N S , KHODADADI J M . Melting and convection of phase change materials in different shape containers: a review [J]. Renewable and Sustainable Energy Reviews, 2015, 43: 449-477.
53	BELLAN S , ALAM T E , GONZÁLEZ-AGUILAR J , et al . Numerical and experimental studies on heat transfer characteristics of thermal energy storage system packed with molten salt PCM capsules [J]. Applied Thermal Engineering, 2015, 90: 970-979.
54	RAUL A , JAIN M , GAIKWAD S , et al . Modelling and experimental study of latent heat thermal energy storage with encapsulated PCMs for solar thermal applications [J]. Applied Thermal Engineering, 2018, 143: 415-428.
55	SAMI S , SADRAMELI S M , ETESAMI N . Thermal properties optimization of microencapsulated a renewable and non-toxic phase change material with a polystyrene shell for thermal energy storage systems [J]. Applied Thermal Engineering, 2018, 130: 1416-1424.
56	GAO Fengxia , WANG Xiaodong , WU Dezhen . Design and fabrication of bifunctional microcapsules for solar thermal energy storage and solar photocatalysis by encapsulating paraffin phase change material into cuprous oxide [J]. Solar Energy Materials and Solar Cells, 2017, 168: 146-164.
57	CHAI Luxiao , WANG Xiaodong , WU Dezhen . Development of bifunctional microencapsulated phase change materials with crystalline titanium dioxide shell for latent-heat storage and photocatalytic effectiveness [J]. Applied Energy, 2015, 138: 661-674.
58	LIN Yaxue , ZHU Chuqiao , FANG Guiyin . Synthesis and properties of microencapsulated stearic acid/silica composites with graphene oxide for improving thermal conductivity as novel solar thermal storage materials [J]. Solar Energy Materials and Solar Cells, 2019, 189: 197-205.
59	JIANG Xiang , LUO Ruilian , PENG Feifei , et al . Synthesis, characterization and thermal properties of paraffin microcapsules modified with nano-Al₂O₃ [J]. Applied Energy, 2015, 137: 731-737.
60	BAŞAL B , ÜNAL A . Numerical evaluation of a triple concentric-tube latent heat thermal energy storage [J]. Solar Energy, 2013, 92: 196-205.
61	ELBAHJAOUI R , QARNIA H EL , NAIMI A . Thermal performance analysis of combined solar collector with triple concentric-tube latent heat storage systems [J]. Energy & Buildings, 2018, 168: 438-456.
62	MAHDI J M , LOHRASBI S , GANJI D D , et al . Accelerated melting of PCM in energy storage systems via novel configuration of fins in the triplex-tube heat exchanger [J]. International Journal of Heat and Mass Transfer, 2018, 124: 663-676.
63	ABDULATEEF A M , MAT S, SOPIAN K , et al . Experimental and computational study of melting phase-change material in a triplex tube heat exchanger with longitudinal/triangular fins [J]. Solar Energy, 2017, 155: 142-153.
64	ABDULATEEF A M , ABDULATEEF J , MAT S, et al . Experimental and numerical study of solidifying phase-change material in a triplex-tube heat exchanger with longitudinal/triangular fins [J]. International Communications in Heat and Mass Transfer, 2018, 90: 73-84.
65	ABDULATEEF A M , MAT S, ABDULATEEF J , et al . Thermal performance enhancement of triplex tube latent thermal storage using fins-nano-phase change material technique [J]. Heat Transfer Engineering, 2018, 39(12): 1067-1080.
66	WEI Gaosheng , WANG Gang , XU Chao , et al . Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: a review [J]. Renewable and Sustainable Energy Reviews, 2018, 81: 1771-1786.
67	ELFEKY K E , AHMED N , WANG Qiuwang . Numerical comparison between single PCM and multi-stage PCM based high temperature thermal energy storage for CSP tower plants [J]. Applied Thermal Engineering, 2018, 139: 609-622.
68	PEIRÓ G , GASIA J , MIRÓ L , et al . Experimental evaluation at pilot plant scale of multiple PCMs (cascaded) vs. single PCM configuration for thermal energy storage [J]. Renewable Energy, 2015, 83: 729-736.
69	TAO Y B , HE Y L . Numerical study on performance enhancement of shell-and-tube latent heat storage unit [J]. International Communications in Heat and Mass Transfer, 2015, 67: 147-152.
70	DZIKEVICS M , ZANDECKIS A . Mathematical model of packed bed solar thermal energy storage simulation [J]. Energy Procedia, 2015, 72: 95-102.
71	YANG Lei , ZHANG Xiaosong , XU Guoying . Thermal performance of a solar storage packed bed using spherical capsules filled with PCM having different melting points [J]. Energy and Buildings, 2014, 68: 639-646.
72	TAO Y B , HE Y L , LIU Y K , et al . Performance optimization of two-stage latent heat storage unit based on entransy theory [J]. International Journal of Heat and Mass Transfer, 2014, 77: 695-703.
73	WU Ming , XU Chao , HE Yaling . Cyclic behaviors of the molten-salt packed-bed thermal storage system filled with cascaded phase change material capsules [J]. Applied Thermal Engineering, 2016, 93: 1061-1073.
74	HU Zhipei , LI Angui , GAO Ran , et al . Enhanced heat transfer for PCM melting in the frustum-shaped unit with multiple PCMs [J]. Journal of Thermal Analysis and Calorimetry, 2015, 120(2): 1407-1416.
75	ALDOSS T K , RAHMAN M M . Comparison between the single-PCM and multi-PCM thermal energy storage design [J]. Energy Conversion and Management, 2014, 83: 79-87.
76	ALDOSS T K , RAHMAN M M . Latent heat energy storage system with continuously varying melting temperature [J]. International Journal of Mechanical Engineering and Robotics Research, 2016, 7(2): 113-119.
77	XU H J , ZHAO C Y . Thermal efficiency analysis of the cascaded latent heat/cold storage with multi-stage heat engine model [J]. Renewable Energy, 2016, 86: 228-237.
78	WANG Peilun , WANG Xiang , HUANG Yun , et al . Thermal energy charging behaviour of a heat exchange device with a zigzag plate configuration containing multi-phase-change-materials (m-PCMs) [J]. Applied Energy, 2015, 142: 328-336.
79	BAINS P S , SINGH H . Exploratory investigation of a new thermal energy storage system with different phase change materials having distinct melting temperatures [J]. Journal of Energy Storage, 2018, 19: 1-9.
80	LI Xiaoyan , HUANG Rongpeng , MIAO Xinyue , et al . Investigation of the dynamic characteristics of a thermal energy storage unit filled with multiple phase change materials [J]. Thermal Science, 2018, 222: S527-S533.
81	ZHAO Y , YOU Y , LIU H B , et al . Experimental study on the thermodynamic performance of cascaded latent heat storage in the heat charging process [J]. Energy, 2018, 157: 690-706.
82	BENMOUSSA H , BENMOUSSA F , BENZAOUI A . Thermal behavior of latent thermal energy storage unit using two phase change materials: effects of HTF inlet temperature [J]. Case Studies in Thermal Engineering, 2017, 10: 475-483.

PCM	导热增强填料	改性方法	效果
Ba(OH)₂·8H₂O^[29]	EG	辛基酚聚氧乙烯	热导率比纯PCM提高了184%
MgCl₂·6H₂O^[30]	EG	TX-100	CPCM的热导率是纯PCM的7.7倍
Na₂CO₃·10H₂O-Na₂HPO₄·12H₂O共晶水合盐^[28]	EG；EGO	氧化	达到相同热导率时EGO添加量较少
蜂蜡^[31]	MWCNTs	球磨法，酸洗法	20%经过球磨法和酸洗法处理后的MWCNTs分别将蜂蜡热导率提高116%和132%
石蜡^[32]	MWCNTs	催化酸洗	处理后的MWCNTs将PCM热导率提高来了150%，优于未处理的MWCNTs
癸酸-十二醇共混物^[33]	氧化石墨烯	N,N,N-三甲基-1-十六烷基溴化铵	添加1%改性氧化石墨烯CPCP导热增强率达184%，添加10%改性氧化石墨烯CPCP导热增强率为407%

PCM	导热增强填料	改性方法	效果
Ba(OH)₂·8H₂O^[29]	EG	辛基酚聚氧乙烯	热导率比纯PCM提高了184%
MgCl₂·6H₂O^[30]	EG	TX-100	CPCM的热导率是纯PCM的7.7倍
Na₂CO₃·10H₂O-Na₂HPO₄·12H₂O共晶水合盐^[28]	EG；EGO	氧化	达到相同热导率时EGO添加量较少
蜂蜡^[31]	MWCNTs	球磨法，酸洗法	20%经过球磨法和酸洗法处理后的MWCNTs分别将蜂蜡热导率提高116%和132%
石蜡^[32]	MWCNTs	催化酸洗	处理后的MWCNTs将PCM热导率提高来了150%，优于未处理的MWCNTs
癸酸-十二醇共混物^[33]	氧化石墨烯	N,N,N-三甲基-1-十六烷基溴化铵	添加1%改性氧化石墨烯CPCP导热增强率达184%，添加10%改性氧化石墨烯CPCP导热增强率为407%

[1]	XIAO Hui, ZHANG Xianjun, LAN Zhike, WANG Suhao, WANG Sheng. Advances in flow and heat transfer research of liquid metal flowing across tube bundles [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 10-20.
[2]	ZHAO Chen, MIAO Tianze, ZHANG Chaoyang, HONG Fangjun, WANG Dahai. Heat transfer characteristics of ethylene glycol aqueous solution in slit channel under negative pressure [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 148-157.
[3]	ZHANG Mingyan, LIU Yan, ZHANG Xueting, LIU Yake, LI Congju, ZHANG Xiuling. Research progress of non-noble metal bifunctional catalysts in zinc-air batteries [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 276-286.
[4]	HU Xi, WANG Mingshan, LI Enzhi, HUANG Siming, CHEN Junchen, GUO Bingshu, YU Bo, MA Zhiyuan, LI Xing. Research progress on preparation and sodium storage properties of tungsten disulfide composites [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 344-355.
[5]	CHEN Lin, XU Peiyuan, ZHANG Xiaohui, CHEN Jie, XU Zhenjun, CHEN Jiaxiang, MI Xiaoguang, FENG Yongchang, MEI Deqing. Investigation on the LNG mixed refrigerant flow and heat transfer characteristics in coil-wounded heat exchanger (CWHE) system [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4496-4503.
[6]	ZHANG Fan, TAO Shaohui, CHEN Yushi, XIANG Shuguang. Initializing distillation column simulation based on the improved constant heat transport model [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4550-4558.
[7]	SHI Yu, ZHAO Yunchao, FAN Zhixuan, JIANG Dahua. Experimental study on the optimum phase change temperature of phase change roofs in hot summer and cold winter areas [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4828-4836.
[8]	BU Zhicheng, JIAO Bo, LIN Haihua, SUN Hongyuan. Review on computational fluid dynamics (CFD) simulation and advances in pulsating heat pipes [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4167-4181.
[9]	ZHANG Chao, YANG Peng, LIU Guanglin, ZHAO Wei, YANG Xufei, ZHANG Wei, YU Bo. Influence of surface microstructure on arrayed microjet flow boiling heat transfer [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4193-4203.
[10]	WANG Jiansheng, ZHANG Huipeng, LIU Xueling, FU Yuguo, ZHU Jianxiao. Analysis of flow and heat transfer characteristics in porous media reservoir [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4212-4220.
[11]	WANG Yungang, JIAO Jian, DENG Shifeng, ZHAO Qinxin, SHAO Huaishuang. Experimental analysis of condensation heat transfer and synergistic desulfurization [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4230-4237.
[12]	TANG Lei, ZENG Desen, LING Ziye, ZHANG Zhengguo, FANG Xiaoming. Research progress of phase change materials and their application systems for cool storage [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4322-4339.
[13]	SHAN Xueying, ZHANG Meng, ZHANG Jiafu, LI Lingyu, SONG Yan, LI Jinchun. Numerical simulation of combustion of flame retardant epoxy resin [J]. Chemical Industry and Engineering Progress, 2023, 42(7): 3413-3419.
[14]	YU Zhiqing, HUANG Wenbin, WANG Xiaohan, DENG Kaixin, WEI Qiang, ZHOU Yasong, JIANG Peng. B-doped Al₂O₃@C support for CoMo hydrodesulfurization catalyst and their hydrodesulfurization performance [J]. Chemical Industry and Engineering Progress, 2023, 42(7): 3550-3560.
[15]	YANG Jingying, SHI Wansheng, HUANG Zhenxing, XIE Lijuan, ZHAO Mingxing, RUAN Wenquan. Research progress on the preparation of modified nano zero-valent iron materials [J]. Chemical Industry and Engineering Progress, 2023, 42(6): 2975-2986.